• PACO™ - Plastic Anterior Control Orthoses. A 3-point pressure orthosis that encourages a mild hyper-extended posture. Lightweight plastic lined with plush soft-foam. Double comfort padding at the sternal, back and lower abdominal areas.  Orthosis size is determined by brace height. Height is measured from sternal notch to pubic - minus 5”. Circumference is adjustable by straps at the back pad and ranges from 30” to 44”. INDICATIONS: Stable compression fractures between T-7 and L-2; Flexible Thoracic Kyphosis; Osteoporosis
    Size Front Height
    Ex-Small 14” height
    Small 16” height
    Medium 18” height
    Large 20” height
    Care Information SADMERC Approved L0472 Code
  • Spinal Orthoses Soft Corset Front Durable cloth abdominal front with Velcro closures.  Washable & lightweight. 9 1/2” standard front height. - Model FC 7 1/2" low profile height - Model FF
    Size Fits approximate Circumference
    Small 29” – 35”
    Medium 35” – 40”
    Large 40” – 46”
    Ex-Large 46” – 52”
  • SPINA® II Lightweight Plastic Spinal Orthosis - Soft Front Traditional plastic chairback orthoses lined with plush soft-foam. Lightweight & durable. The 2” straps are made of double-sided Velcro webbing, adjustable at both ends which provide a wide range of flexibility. 12” back height Standard 9" soft front. Model 1200 Low Profile 7" soft front. Model 1201 IndicationsChronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization;Spinal Stenosis; Spondylolisthesis; Spondylolysis
    Size Hip Circumference
    Small 30” – 35”
    Medium 36” – 41”
    Large 42” – 47”
    Ex-Large 48” – 52”
    2X-Large 52” - 56"
    Care Information SADMERC Approved L0633
  • SPINA® III Spinal Orthosis - Rigid Anterior Traditional chair back orthosis with rigid anterior panel and soft-foam lined posterior rigid frame. The 2” double-sided Velcro closure straps are adjustable at both ends which provide a wide range of flexibility. Easy cross-pull straps provide even compression. 12” back height Standard 9" front  with a 7” rigid anterior insert. Model 1219 Low Profile 7" front  with a 5” rigid anterior insert. Model 1218 IndicationsChronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization;Spinal Stenosis; Spondylolisthesis; Spondylolysis  
    Size Hip Circumference
    Small 30" - 35"
    Medium 36" - 41"
    Large 42" - 47"
    Ex-Large 48" - 52"
    2X-Large 52" - 56"
    Care Information SADMERC Approved L0627
  • Spina IV Classic Spinal Orthosis Traditional classic chairback orthosis with rigid anterior panel and soft foam lined rigid posterior frame.  The 2” double-sided Velcro closure straps are adjustable at both ends which provide a wide range of flexibility. Easy cross-pull straps provide even compression. 14 ” back height Select Standard 9” front with a 7” pre-molded anterior insert.  - Model 1400 Low Profile 7” front with a 5” pre-molded anterior insert.  - Model 1401   Indications: Chronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization; Spinal Stenosis; Spondylolisthesis; Spondylolysis
    Size Hip Circumference
    Small 30" - 35"
    Medium 36" - 41"
    Large 42" - 47"
    Ex-Large 48" - 52"
    2X-Large 52" - 56"
    Care Information SADMERC Approved L0637
  • SPINA VII Knight-Taylor Spinal Orthosis Traditional plastic Knight-Taylor Spinal TLSO Orthoses lined with a plush soft-foam. The 2” double-sided Velcro closure straps are adjustable at both ends which provide a wide range of flexibility. Easy cross-pull straps for even compression. Adjustable over-the-shoulder straps with foam axillary pads.  Soft Front. Gray. 18” back height Model 1275 - Standard 9" front with a 7" pre-molded plastic insert. Model 1276 - Low Profile 7" front with a 5" pre-molded plastic insert. Indications  Thoracic compression fractures; Lumbar Spinal Laminectomy; Multiple Level Decompression; Posterior Lateral Fusion; Thoracic mechanical back pain; Spinal Stenosis; Spondylolisthesis; Spondylolysis
    Size Hips
    Small 30” – 35”
    Medium 36” – 41”
    Large 42” – 47”
    Ex-Large 48” – 52”
    2X-Large 51" – 56”
    Care Information SADMERC Approved L0466 Code
  • Dorsolumbar Extension For the V-Line series of Spinal Orthoses Our dorsolumbar extension, DLE, is a posterior extension unit that fits all our V-Line PRO V LSO style spinal orthoses. Attach our DLE to our Models V1 - V2 or V3  for A Verified PDAC L0456  Model V15 Turn an LSO into a TLSO.
  • Anterior Extension For the V-Line series of Spinal Orthoses Our Anterior Extension, ATE comes in 2 sternal shield widths. Full 19" of adjustment. Fits all our V-Line PRO V spinal orthoses. Extension bars with 6" sternal shield - Model  -  ATE 6 Extension bars with 8" sternal shield - Model  -  ATE 8 All screws & hardware included.   Suggested PDAC L1220 Addition to TLSO (Low Profile) Anterior Thoracic Extension
  • PRO-V1 Spinal Orthosis - LSO Our PRO-V Model V1 Spinal LSO Orthosis features comfort, stability and a wide array of options. A single piece design makes for easy application and effective compression. Pre-molded posterior inserts come in 0º – 7º – 12º – 25º lordosis with a spinal relief cut-out. Pre-molded anterior inserts comes standard or pendulus and are pre-slotted to accommodate an anterior thoracic extension. The anterior pocket is fully adjustable providing correct positioning and accommodating a wider range of sizes. Designed with two smooth cross-pull compression straps, with elastic tension ends. Hand-pull tabs on all ends. 14” back height Select Standard 9" front - Model V1 Low Profile 7" front - Model V2 Select Posterior Panel lordosis - 0º - 7º - 12º - 25 º lordosis.  (12º comes standard) Select Neutral abdomen Pendulous abdomen Indications: Chronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization; Spinal Stenosis; Spondylolisthesis; Spondylolysis Select Size Unisex Sizing
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information Approved PDAC  L0637 - L0650  
  • PRO-V20 Spinal Orthosis - TLSO Our PRO-V Model V20 spinal orthosis is a single piece TLSO design that comes with anterior & posterior pre-slotted  inserts. Our posterior insert comes with spinal relief cut out and anterior insert comes fully attached with adjustable sternal kit componentry. Two smooth cross-pull compression straps with elastic tension ends make for easy application yet effective compression. Hand-pull tabs on all ends. Our anterior pocket is fully adjustable providing correct positioning for abdomen & sternal kit and accommodating a wider range of sizes. Patient friendly over-the-shoulder straps apply easy as a backpack. Comes Standard Standard 9" front Select 18" Posterior Panel - 0º - 7º - 12º - 25º Lordosis. 12º lordosis comes standard Select 6" Sternal Shield 8" Sternal Shield Select Neutral abdomen Pendulous abdomen Indications: Compression fractures of the thoracic spine; Thoracic mechanical back pain; Acute pain relief by thoracic postural extension alignment. Kyphosis. Select Size; Unisex Sizing
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information PDAC Verified L0456 
  • PRO-V28 Spinal Orthosis – TLSO U.S. Orthotics PRO-V Model V28 (L0464) spinal orthosis is a single piece TLSO design that accommodates appropriate motion restriction throughout the healing process and maximum control for your patient with severe, high-level back pain. The Pro-V28 delivers triplanar control by means of a posterior-lateral panel and circumferentially-overlapping plastic, with an anterior panel: sternal plate assembly and padded shoulder straps. Two smooth cross-pull compression straps with elastic tension ends make for easy application and effective compression. Optional under -the-axilla padded straps or patient-friendly over-the-shoulder straps that apply easy as a backpack. Hand-pull tabs on ends. Comes Standard Standard 9" front Select 18" Posterior Panel - 0º - 7º - 12º - 25º Lordosis. 12º lordosis comes standard Select 6" Sternal Shield 8" Sternal Sheild Select Neutral abdomen Pendulous abdomen Indications: Compression fractures of the thoracic spine; Thoracic mechanical back pain; Acute pain relief by thoracic postural extension alignment. Kyphosis. Select Size; Unisex Sizing
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information PDAC Verified L0464
  • PRO-V3 Spinal Orthosis - LSO Our PRO-V Model V3 spinal LSO orthosis is a single piece design and comes with anterior & posterior pre-molded inserts. Our posterior insert comes with spinal relief cut out and anterior insert is pre-stamped to accommodate a sternal kit. Two smooth cross-pull compression straps with elastic tension ends make for easy application yet effective compression. Hand-pull tabs on all ends. Our anterior pocket is fully adjustable providing correct positioning and accommodating a wider range of sizes. 12” back height Standard 7" front Select Posterior Panel Lordosis - 0º - 7º - 12º - 25º Lordosis.  (12º comes standard) Select Neutral abdomen Pendulous abdomen
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information PDAC verified L0627 - L0642
  • PRO-V6 Spinal Orthosis - TLSO Our PRO-V Model V6 & V7 spinal orthosis is a single piece TLSO design that comes with anterior & posterior pre-molded inserts. Our posterior insert comes with spinal relief cut out and anterior insert is pre-slotted to accommodate a sternal kit. Two smooth cross-pull compression straps with elastic tension ends make for easy application yet effective compression. Hand-pull tabs on all ends. Our anterior pocket is fully adjustable providing correct positioning and accommodating a wider range of sizes. Patient friendly shoulder straps apply easy as a backpack. Padded axillary pads & straps attach in front with Velcro. Select Standard 9' front - Model V6 Low Profile 7' front - Model V7 Select Neutral  abdomen Pendulous abdomen Select 18" Posterior Panel  - 0º - 7º - 12º - 25º Lordosis.  (12º comes standard) Indications: Compression fractures of the thoracic spine; Thoracic mechanical back pain; Acute pain relief by thoracic postural extension alignment. Kyphosis.
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information Approved PDAC L0456
  • PRO-V9 Spinal Orthosis - LSO Our PRO-V Model V9 spinal LSO orthosis is a two piece design that comes with anterior & posterior pre-molded inserts. Our posterior insert comes with spinal relief cut out and anterior insert is pre-slotted to accommodate a sternal kit. Elastic side panels provide compression with an additional elastic tension top strap for easy application yet effective compression. No side panel lateral control. Hand-pull tabs on all ends. Select Standard 9" front - Model V9 Low Profile 7" front - Model V10 Select 14” Posterior Panel lordosis - 0º - 7º - 12º - 25 º lordosis.  (12º comes standard) Select: Neutral  abdomen Pendulous abdomen IndicationsChronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization;Spinal Stenosis; Spondylolisthesis; Spondylolysis Select Size Unisex Sizing
    Size Hips
    Small 32” – 38”
    Medium 36” – 42”
    Large 40” – 46”
    Ex-Large 44” – 50”
    2XL 48” – 54”
    3XL 52” – 58”
    4XL 56” – 62”
    Care Information PDAC verified L0631 - L0648
  • Z-Cross Z4-U

    Our Z-Cross Model Z4-Universal Spinal LSO Orthosis features comfort and stability. They are designed with a 6:1 mechanical advantage compression strapping system, utilizing dual pull string pulley straps. One smooth pull securely forms the Z-Cross to the patient’s torso and provides intra-abdominal compression, reducing the load on inter-vertebral discs. No tools are needed. Simply adjust side panels to adapt to any body shape and size.

    12” posterior height with spinal relief cut-out. 7” anterior height. Fully adjustable side panels.

    Sizing Universal Circumference Fits approximately 28 to 48 circumference.

    1 pair of adjustable extension panels can add an additional 14” to the circumference and fit up to 62”.  Model ZEP panels sold separately.

    extension panels sold separately.

    Indications Chronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization; Spinal Stenosis; Spondylolisthesis; Spondylolysis

    Care Information

    PDAC Approved L0637 / L0650

    Marketing Literature

  • Z5-U Spinal Orthosis – Universal LSO

    Our Z-Cross Model Z5-Universal Spinal LSO Orthosis features comfort and stability. They are designed with a 6:1 mechanical advantage compression strapping system, utilizing dual pull string pulley straps. One smooth pull securely forms the Z-Cross to the patient’s torso and provides intra-abdominal compression, reducing the load on inter-vertebral discs. No tools are needed. Simply adjust side panels to adapt to any body shape and size.

    14” posterior height with spinal relief cut-out. 7” anterior height. Fully adjustable side panels. Sizing Universal Circumference. Fits approximately 28″ to 48″ circumference.

    1 pair of adjustable extension panels can add an additional 14” to the circumference and fit up to 62”.  Model ZEP panels sold separately.

    extension panels sold separately.

    Indications: Chronic Back Pain; Compression Fracture; Herniated / Bulging Disk ; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization; Spinal Stenosis; Spondylolisthesis; Spondylolysis

    Care Information

    PDAC Approved L0637 / L0650

    Marketing Literature

  • Z8-U Spinal Orthosis – Universal LSO

    Our Z-Cross Model Z4-Universal Spinal LSO Orthosis features comfort and stability. They are designed with a 6:1 mechanical advantage compression strapping system, utilizing dual pull string pulley straps. One smooth pull securely forms the Z-Cross to the patient’s torso and provides intra-abdominal compression, reducing the load on inter-vertebral discs. No tools are needed. Simply adjust side panels to adapt to any body shape and size.

    14” posterior height with spinal relief cut-out. 7” anterior height. Fully adjustable side panels. Movable lateral control panels. Sizing Universal Circumference Fits approximately 28″ to 48″ circumference. 1 pair of adjustable extension panels can add an additional 14” to the circumference and fit up to 62”. Model ZEP panels sold separately.

    extension panels sold separately.

    Indications: Chronic Back Pain; Compression Fracture; Herniated / Bulging Disk; Laminectomy; Ligament Strain; Muscle Sprain; Spinal Stabilization; Spinal Stenosis; Spondylolisthesis; Spondylolysis

    Care Information

    PDAC Approved L0637 / L0650

    Marketing Literature

  • Extension panels for Z-Cross Models Z4-U  / Z5-U & Z8-U  Spinal Orthosis – Universal LSO

    Sizing

    Our Model ZEP adjustable extension panels add up to 14” and extend the circumference for our Z-Cross Spinal Orthoses up to 62”.

    Extension panels sold separately.

    Care Information

    Marketing Literature

Title

Go to Top